Flopro+ digital timer

SHOP CATEGORIES > ALL FOR GARDEN > WATERING SYSTEM

Flopro+ digital timer
  • Flopro+ digital timer
  • Flopro+ digital timer

  • Flopro+ digital timer

  • Flopro+ digital timer | Watering and irrigation system for your garden | Shop full range of garden hoses, fittings, sprinklers and more | Nationwide delivery
  • €49.99

:  at  €49.99  each


  • Easily programmable timer with LCD display
  • Automatic and manual modes to suit watering needs
  • Rain delay function
  • Regular irrigation or short interval programs
  • Run time up to 360 minutes
  • Batteries required (2 x AA)
  • Diameter: 19mm (3/4″) & 12.5mm (1/2″) inserts
  • Anti-leak
  • Snap-fit
  • 100% compatible with all watering brands

universal fitting icon snap fit icon anti leak icon

How to Use

  • The timer comes with a front cover that just clicks into place below the dial
  • Insert 2 x AA batteries – Squeeze together the two tabs on the back of the timer to pull out the tray that holds the batteries
  • Once inserted the screen will display as 12.00
  • Set the time by turning the dial to “SET CLOCK”. Set correct time by using the “+” and “-” buttons. Hold buttons down to speed up the setting

Automatic Mode

  • Set the Start Time:
    Turn dial to “START TIME”. Set desired time by using the “+” and “-” buttons. Hold buttons down to speed up the setting
  • Set the Running Time:
    Turn the dial to “HOW LONG”. Set desired time by using the “+” and “-” buttons. Hold buttons down to speed up the setting. The setting ranges from 0 secs – 360 mins
  • Set the Frequency:
    Turn the dial to “HOW OFTEN”. Set desired parameter by using the “+” and “-” buttons. The setting ranges from 10 secs to 7 days
  • Once all the above have been completed turn the dial to “RUN” to start your Automatic Watering Program. When set the display will alternate between the current time and what time the next watering schedule is due to start.

Rain Delay Function

  • Press the rain delay button to delay your Auto Set Program in wet weather. Keep pressing the button to move between 24, 48 or 72 hours
  • Once set the display will alternate between the current time and a countdown of the set delay time
  • To cancel the rain delay function, turn the dial to “OFF” and then back to “RUN”, the timer will resume to your Automatic Program set

Manual Mode

  • Turn the dial to “RUN” and press the Manual Watering Button. Set desired time by using the “+” and “-” buttons. Hold buttons down to speed up the setting. You can set the time range between 0-240 mins
  • Once set the display will alternate between the current time and a running countdown of the manual watering time set
  • The water drops will flash in a clockwise motion to indicate that the manual setting is in progress
  • To cancel – Turn the dial to “OFF”. When the dial is turned back to “RUN” the timer will revert back to the set Automatic Watering program